Peerless PA730 Articulating Wall Mount for 10 Inch to 22 Inch Flat Panel Displays Gloss Black
February 25, 2009 by admin · Leave a Comment
Peerless PA730 Articulating Wall Mount for 10 Inch to 22 Inch Flat Panel Displays Gloss Black
It’s easy to get the best viewing position when you can effortlessly pull out the screen from the wall, position it in almost any direction, even turn it around corners and then smoothly return it to the wall when finished. Level the screen at any time, even after installation, for that picture perfect end result. Never worry about cables and cords getting in the way; cable management delivers a clean clutter-free look to any installation.
User Ratings and Reviews
5 Stars TV wall mount
Rated at 25 lbs. I believe this would support 100 lbs. using enclosed screws. Originally purchased non tilting mount- a mistake. Also note: comes in two different finishes
5 Stars Solid, easy to install
I used this to attach an 18″ LCD to the wall above a desk. The articulation is very easy, solid and smooth. I push the monitor against the wall to get the desk surface back. It’s sturdy enough for something larger – I have no doubt that it would hold a 24″. It was also very easy, I didn’t look at any instructions and it took my ~10 minutes to find the stud, mark the holes (use a level to make sure they’re vertical), drill two holes – and that’s the hard part. I was not sure if this tilted when I bought it – the PA730 does NOT tilt – not a big deal to me…
Cheetah Mounts APTMMB Tilt Wall Mount for 32 55 Plasma and LCD Displays
February 21, 2009 by admin · Leave a Comment
Cheetah Mounts APTMMB Tilt Wall Mount for 32 55 Plasma and LCD Displays
PRODUCT FEATURES:Fully adjustable 0-15 degree tilt angleUniversal design fits virtually all 32″-55″ modelsSturdy construction holds up to 150LBS
User Ratings and Reviews
1 Star my review for the cheetah aptmmb plasma wall mount
I would like to start by saying that the picture that is illustrated for this product is not the product I received. The picture shows the wall mount as one piece. What I received was a wall bracket that was supposed to consist of four pieces of which I only got shipped two. I received the top and bottom of the wall mount so I still made it work but I had to measure out where the bottom should go to make it work. It was supposed to come with two more pieces to go on the sides of the wall bracket to attach the top to the bottom and make it one piece. Secondly, I didn’t receive any bolts that would work on attaching the bracket to the back of my plasma TV. They supplied bolts but they were the wrong size and they also said that if that didn’t work the bolts from the table stand that came with the TV would work. None of them fit. Needless to say I had to find my own bolts to get it to work. Last but not least to top it all off the level they installed on the wall bracket was installed incorrectly and when it showed level it actually was not level. I know this because when I leveled it using the installed level something didn’t look quite right so I checked it with my 4′ level and sure enough not level. I wonder how many people out there just trusted the installed level and now have their TV’s on their walls out of level.
I would have to say that I have put together quite a few things in my day and this product has to be one of the worst. My recommendation, don’t buy it!
5 Stars excellent mount! Best value out there!
I bought this mount for my 47″ LG LCD flat screen. There are so many positioning holes in the mount brackets that you can’t help but get a perfect fit. The wall mount is very sturdy and has no problem holding a 60+ lb tv. All the mounting screws and lag bolts were included with the mount. One note – The built in “bubble level” on the wall mount is basically useless. If you want a perfect install use a tape measurer in combination with a large carpenter level or a laser level.
3 Stars Well worth the money, but some unexpected problems
This items was delivered quickly and seems to work just as well as the much higher priced ones. I did have two issues with it though.
1. All the instructions talk about mounting the bracket into a concrete wall and they provide the bolts and plastic sleeves to do that…but how many of us have concrete walls? I have drywall and 2×4 walls and was disappointed to see that the slots for the mounting bolts are spaced so that they don’t line up with a wall with 24″ on-center studs. I used a stud finder and moved the pilot holes in the wall in just a little so that the bolts will fit in the slots. It hasn’t fallen down yet so I think it’s fine, but it would have been much nicer if the slots were spaced so that the middle of the 2×4 fell in the middle of the slots and not and the extreme ends.
2. The level mounted on the mounting plate is junk. I put mine up right next to the end of a wall so it was obvious to me that there was a problem. I got my own level out of the garage and when my level had the plate at level, the bubble in the level on the plate was all the way to one side. Had I been putting this up in the middle of a wall I’d have had a rude surprise when I stood back a bit.
Overall I’m happy with it. Just keep these factors in mind when you go to put it up.
5 Stars Great LCD TV Mount….don’t be fooled by the low price!
I was wondering how good this mount would be, give that it was priced at $19.99, but gave it a try due to the many positive reviews. Install is easy and the mount is solid and well made. I highly recommend this mount it worked great for my Samsung Series-6 LCD 46″ TV. Don’t waste your money at the store for a $100+ TV mount, buy this one, it is great!!
2 Stars Missing Parts
I ordered 2 of this mount and started to set up the first one. When I realized there were missing parts, I left a voicemail and email, and received zero response. This leaves one wall mount virtually useless because it’s the hooks holding up the tv that are missing. I can’t believe I spent double the money for only one wall mount that works. I’d gladly take some follow-up contact and the missing parts!
The mount that was usable was perfectly fine and is holding up a 40″ Sony Bravia TV. It seems sturdy enough, but to tilt the tv out to reach the plugs in the back, you basically have to unscrew these bigs screws on the bottom and ask someone to hold the tv away from the wall. So to me, the tilt feature is not really a realistic feature. Again, it’s worth it because I just want it to hang on the wall.
As for the mount I received with missing parts, I would gladly go down to the local hardware store and try to rig the mount to work, but I was planning on hanging a 50″ plasma Panasonic tv with it, so I would prefer having the original hooks I need.
You definitely need to figure out the size of the screws you’ll need for the back of the tv, but buy the same screws at least one size smaller and one size bigger, just in case. You can always take them back, but when I tried to hang it with what I thought was the correct size screw, I had trouble getting it through the holes on the mount. The directions suggest using a hammer, but I’m not going to hammer anything into the back of my flat-screen LCD tv– sorry. In other words, putting the mount up is probably going to be a little frustrating, but for the price, it’s worth it. If you don’t get all the parts, add one point to the seller for getting rid of a useless mount, but if it all works out, you’ll be happy.
I would have given it four stars had both mounts work, and only taking off one star for not really being able to tilt. But since only one of the mounts had all the parts, I took off two more stars, bringing it down to two stars.
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
February 16, 2009 by admin · Leave a Comment
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
Tilt Plasma Mount For 37″ T0 70″, Back Plate Is 36″ Wide 9.4″ High, Vertical Bars Top Hole To Bottom Hole 18.75″, Distance from Wall To Back Of TV 3″
User Ratings and Reviews
5 Stars Great deal
Great product. They quality of the mount really impressed me. Very sturdy. With a stud finder this mount is easy to install. Don’t pay 2 or 3 times the price for a wall mount at the store!
4 Stars Truely a 200$ Mount
This mount would definatly be sold for 200$ at any big box store. It is sturdy and solid with plenty of bolts, washers, spacers, etc. Easy to instal, total confidence in placing big 50″ plasma. One of the main reasons that I chose this one was all the mounting holes on the base plate. This ensured that I could mount the tv in the middle of the wall even if the studs were not on center.
5 Stars easy to use
I am not a handyman. I was a-feared. Can I do it. I paid 1200 dollars for this TV. Am I going to destroy it? Luckly, instillation was easy. I installed two tv’s with this device and the sense of accomplishment still hasn’t left me. I am very proud of this purchase. I give this product three thumbs up. That means I had to borrow a thumb from my neighbor to write this review.
5 Stars Strong, simple, perfect
You want to install your brand new flat screen at the wall and already spent a lot of money on the TV itself so you need something that works and has a good price? GET THIS ONE because it is strong and easy to mount. If I mounted mine and it hasn’t fallen in 1 month it means it’s good. Of course I am smart: read the instructions and used a stud finder.
2 Stars Dishonest Description
They claim this product to be less than two inches from the wall. After mounting it, we discovered it’s nearly three inches and looks silly having our plasma sticking out so far. We will be getting a replacement.
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
January 21, 2009 by admin · Leave a Comment
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
Tilt Plasma Mount For 37″ T0 70″, Back Plate Is 36″ Wide 9.4″ High, Vertical Bars Top Hole To Bottom Hole 18.75″, Distance from Wall To Back Of TV 3″
User Ratings and Reviews
5 Stars Great deal
Great product. They quality of the mount really impressed me. Very sturdy. With a stud finder this mount is easy to install. Don’t pay 2 or 3 times the price for a wall mount at the store!
2 Stars Dishonest Description
They claim this product to be less than two inches from the wall. After mounting it, we discovered it’s nearly three inches and looks silly having our plasma sticking out so far. We will be getting a replacement.
5 Stars easy to use
I am not a handyman. I was a-feared. Can I do it. I paid 1200 dollars for this TV. Am I going to destroy it? Luckly, instillation was easy. I installed two tv’s with this device and the sense of accomplishment still hasn’t left me. I am very proud of this purchase. I give this product three thumbs up. That means I had to borrow a thumb from my neighbor to write this review.
4 Stars Truely a 200$ Mount
This mount would definatly be sold for 200$ at any big box store. It is sturdy and solid with plenty of bolts, washers, spacers, etc. Easy to instal, total confidence in placing big 50″ plasma. One of the main reasons that I chose this one was all the mounting holes on the base plate. This ensured that I could mount the tv in the middle of the wall even if the studs were not on center.
5 Stars Strong, simple, perfect
You want to install your brand new flat screen at the wall and already spent a lot of money on the TV itself so you need something that works and has a good price? GET THIS ONE because it is strong and easy to mount. If I mounted mine and it hasn’t fallen in 1 month it means it’s good. Of course I am smart: read the instructions and used a stud finder.
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
December 27, 2008 by admin · Leave a Comment
DigiTV Plasma and LCD TV Tilting Wall Mount Universal Design for 40 to 70 Displays
Tilt Plasma Mount For 37″ T0 70″, Back Plate Is 36″ Wide 9.4″ High, Vertical Bars Top Hole To Bottom Hole 18.75″, Distance from Wall To Back Of TV 3″
User Ratings and Reviews
5 Stars easy to use
I am not a handyman. I was a-feared. Can I do it. I paid 1200 dollars for this TV. Am I going to destroy it? Luckly, instillation was easy. I installed two tv’s with this device and the sense of accomplishment still hasn’t left me. I am very proud of this purchase. I give this product three thumbs up. That means I had to borrow a thumb from my neighbor to write this review.
5 Stars Strong, simple, perfect
You want to install your brand new flat screen at the wall and already spent a lot of money on the TV itself so you need something that works and has a good price? GET THIS ONE because it is strong and easy to mount. If I mounted mine and it hasn’t fallen in 1 month it means it’s good. Of course I am smart: read the instructions and used a stud finder.
4 Stars Truely a 200$ Mount
This mount would definatly be sold for 200$ at any big box store. It is sturdy and solid with plenty of bolts, washers, spacers, etc. Easy to instal, total confidence in placing big 50″ plasma. One of the main reasons that I chose this one was all the mounting holes on the base plate. This ensured that I could mount the tv in the middle of the wall even if the studs were not on center.
5 Stars Great deal
Great product. They quality of the mount really impressed me. Very sturdy. With a stud finder this mount is easy to install. Don’t pay 2 or 3 times the price for a wall mount at the store!
2 Stars Dishonest Description
They claim this product to be less than two inches from the wall. After mounting it, we discovered it’s nearly three inches and looks silly having our plasma sticking out so far. We will be getting a replacement.
